Mastercam shows this when you send a program from CAM Assist after changing machine groups or tools in Mastercam while the CAM Assist window was open. You can continue, but the program was planned for the part as it was when you started CAM Assist.
The Mastercam part has changed while CAM Assist was running.
Changes:
- <one or more changes>
Do you wish to continue creating the program?
Select OK to continue or Cancel to stop.
What it means
| Change listed | What you did | What happens if you click OK |
|---|---|---|
| "Setups reordered." | Moved machine groups. | Operations still go into the machine group they were planned for. |
| "Some target setups were deleted. Operations for those setups will be skipped." | Deleted a machine group CAM Assist planned for. | Operations for the deleted groups aren't created. The rest are. |
| "Some session tools were modified or deleted. CAM Assist planned with their original definitions." | Edited or deleted a tool in Mastercam that CAM Assist is using. | The program uses the tool as it was when CAM Assist started. |
Is it safe to continue?
OK creates the program as described above. Cancel stops: nothing is created in Mastercam. Check the result before you machine anything.
To get a program that matches the part as it is now, click Cancel and run CAM Assist again.
"None of the target setups are available. Please run CAM Assist again."
You deleted every machine group CAM Assist planned for. Nothing is created. Run CAM Assist again.
If sending the program fails
| Message | What to do |
|---|---|
| "Mastercam could not start creating the program. Finish any active work or close its dialogs, then resend from CAM Assist." | Mastercam was busy. Finish or cancel the current command, close any open Mastercam dialogs, then send the program again from CAM Assist. |
| "The original Mastercam part is not active. Switch back and send again." | Switch back to the part you started CAM Assist from, then send the program again. |
Importing a tool library can show similar messages. See My tool library won't import into CAM Assist.
Still seeing it?
If you've done all of the above and still can't create the program, contact CloudNC support. Include the part file and the log files from %ProgramData%\CloudNC Ltd\CAM Assist\logs.