Autodesk Fusion shows this after you click Send to CAM package when no operations were created in the document.
CloudNC CAM Assist completed but produced no operations.
This is often caused as the part cannot be machined by the tools in the provided toolset.
The message mentions a Toolset onboarding tab. That tab no longer exists; use the steps below instead.
How to fix it
- Run CAM Assist again and check the Program has operations before you send. If it doesn't, the tools you gave CAM Assist can't machine the part. See No usable tools for this part.
- Check your tool library meets Tool library requirements, and that the tools you expect have the right usages enabled.
- Check you didn't delete or change the setups while CAM Assist was open. Operations for deleted setups are skipped. See Send to CAM package fails or warns in Autodesk Fusion.
- Send again.
You also see this message if every operation was turned off when you sent. Turn on Enabled for the operations you want, then send again. See Which operations get sent to my CAM package?
This message can also appear if CAM Assist made operations but Fusion rejected all of them. If the Program had operations, contact support.
Still seeing it?
The message opens in a report dialog. Tick Upload log file? and Upload STEP file?, add your e-mail, and click Send report so CloudNC can investigate.
If you've done all of the above and still see this message, contact CloudNC support. Include the part file and both log files (cam_assist.log and cloudnc-sdk.log) from:
- Windows:
%APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\CAMAssist\logs - Mac:
~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/CAMAssist/logs